| Prefix |
Suffix |
Definition |
| . |
0 |
POSITION 7- - OTHER (FOR NO SEPARATOR) |
| . |
0 |
POSITION 8 - OTHER METHOD OF PILOTING |
| . |
1 |
POSITION 7- NO GEAR WITH SPACERS |
| . |
1 |
POSITION 8 - PILOT ON BORE AND OUTSIDE DIAMETER |
| . |
2 |
POSITION 7- - EXTERNAL GEAR WITH SPACERS |
| . |
2 |
POSITION 8 - PILOT ON BOTH LANDS |
| . |
3 |
POSITION 7- - INTERNAL GEAR WITH SPACERS |
| . |
3 |
POSITION 8 - PILOT BORE AND OUTER RACE LAND |
| . |
4 |
POSITION 7- - NO GEAR WITH STEEL SEGMENTS |
| . |
4 |
POSITION 8 - PILOT ON OUTSIDE DIAMETER AND INNER RACE LAND |
| . |
5 |
POSITION 7- - EXTERNAL GEAR WITH STEEL SEGMENTS |
| . |
5 |
POSITION 8 - PILOT ON BORE ONLY |
| . |
6 |
POSITION 7- - INTERNAL GEAR WITH STEEL SEGMENTS |
| . |
6 |
POSITION 8 - PILOT ON OUTSIDE DIAMETER ONLY |
| . |
7 |
POSITION 7- - NO GEAR WITH OTHER SEPARATOR |
| . |
7 |
POSITION 8 - PILOT ON INNER RACE LAND ONLY |
| . |
8 |
POSITION 7- - EXTERNAL GEAR WITH OTHER SEPARATOR |
| . |
8 |
POSITION 8 - PILOT ON OUTER RACE LAND ONLY |
| . |
9 |
POSITION 7- - INTERNAL GEAR WITH OTHER SEPARATOR |
| . |
9 |
POSITION 8 - NO PILOTS |
| . |
A |
POSITION 5 - BALL BEARING, PRECISION GRADE. |
| . |
A |
POSITION 6 - 3/4 INCH BALL DIAM |
| . |
A |
POSITION 9 - TWO MOLDED BUNA-N RUBBER FACE SEALS, ONE WITH CONTACT LIP ON INNER RACE AND ONE WITH CONTACT LIP ON OUTER RACE. |
| . |
A |
POSITION 10 - THRU HOLES BOTH RACES. |
| . |
B |
POSITION 5 - BALL BEARING, CONSTRUCTION GRADE. |
| . |
B |
POSITION 6 - 7/8 INCH BALL DIAM |
| . |
B |
POSITION 9 - TWO MOLDED BUNA-N RUBBER SEALS , ONE FACE SEAL WITH CONTACT LIP ON INNER RACE AND ONE LAND SEAL WITH CONTACT LIP ON OUTER RACE. |
| . |
B |
POSITION 10 - TAPPED HOLES BOTH RACES. |
| . |
C |
POSITION 5 - ROLLER BEARING, PRECISION GRADE. |
| . |
C |
POSITION 6 - 1 INCH BALL DIAM |
| . |
C |
POSITION 9 - TWO MOLDED BUNA-N RUBBER SEALS, ONE FACE SEAL WITH CONTACT LIP ON INNER RACE AND ONE LAND SEAL WITH CONTACT LIP ON OUTER RACE. |
| . |
C |
POSITION 10 - COUNTERBORED HOLES BOTH RACES. |
| . |
D |
POSITION 5 - ROLLER BEARING, CONSTRUCTION GRADE. |
| . |
D |
POSITION 6 - 1.1/8 INCH BALL DIAM |
| . |
D |
POSITION 9 - TWO MOLDED BUNA-N RUBBER SEALS , ONE FACE SEAL WITH CONTACT LIP ON OUTER RACE AND ONE LAND SEAL WITH LIP ON INNER RACE. |
| . |
D |
POSITION 10 - THRU HOLES INNER RACE AND TAPPED HOLES OUTER RACE. |
| . |
E |
POSITION 6 - 1.1/4 INCH BALL DIAM |
| . |
E |
POSITION 9 - TWO MOLDED BUNA-N RUBBER SEALS - ONE FACE SEAL WITH CONTACT LIP ON OUTER |
| . |
E |
POSITION 10 - THRU HOLES INNER RACE AND COUNTERBORED HOLES OUTER RACE. |
| . |
F |
POSITION 6 - 1.3/8 INCH BALL DIAM |
| . |
F |
POSITION 9 - ONE MOLDED BUNA-N RUBBER FACE SEAL WITH CONTACT LIP ON INNER RACE AND ONE PHENOLIC LAMINATE SHIELD. |
| . |
F |
POSITION 10 - THRU HOLES OUTER AND TAPPED HOLES INNER RACE. |
| . |
G |
POSITION 6 - 1.1/2 INCH BALL DIAM |
| . |
G |
POSITION 9 - ONE MOLDED BUNA-N RUBBER FACE SEAL WITH CONTACT LIP ON OUTER RACE AND ONE PHENOLIC LAMINATE SHIELD. |
| . |
G |
POSITION 10 - THRU HOLES OUTER AND COUNTERBORED HOLES INNER RACE. |
| . |
H |
POSITION 6 - 1.5/8 INCH BALL DIAM |
| . |
H |
POSITION 9 ?a ONE MOLDED BUNA-N RUBBER FACE SEAL WITH CONTACT LIP ON INNER RACE. |
| . |
H |
POSITION 10 - TAPPED HOLES INNER AND COUNTERBORED HOLES OUTER RACE. |
| . |
J |
POSITION 6 - 1.3/4 INCH BALL DIAM |
| . |
J |
POSITION 9 ?a ONE MOLDED BUNA-N RUBBER FACE SEAL WITH CONTACT LIP ON OUTER RACE. |
| . |
J |
POSITION 10 - TAPPED HOLES OUTER RACE AND COUNTERBORED HOLES INNER RACE. |
| . |
K |
POSITION 6 - 1.7/8 INCH BALL DIAM |
| . |
K |
POSITION 9 ?a TWO MOLDED BUNA-N RUBBER LAND SEALS WITH CONTACT LIPS ON INNER RACE. |
| . |
K |
POSITION 10 - WELD RING INNER RACE AND THRU HOLES OUTER RACE. |
| . |
L |
POSITION 6 - 2 INCH BALL DIAM |
| . |
L |
POSITION 9 - TWO MOLDED BUNA-N RUBBER LAND SEALS WITH CONTACT LIPS ON OUTER RACE. |
| . |
L |
POSITION 10 ?a WELD RING INNER RACE AND TAPPED HOLES OUTER RACE. |
| . |
M |
POSITION 6 - 2.1/4 INCH BALL DIAM |
| . |
M |
POSITION 9 ?a TWO MOLDED BUNA-N RUBBER LAND SEALS, ONE WITH CONTACT LIP ON INNER1 RACE AND ONE PHENOLIC LAMINATE SHIELD. |
| . |
M |
POSITION 10 - WELD RING INNER RACE AND COUNTERBORED HOLES OUTER RACE. |
| . |
N |
POSITION 6 - 2.1/2 INCH BALL DIAM |
| . |
N |
POSITION 10 - WELD RING OUTER RACE AND THRU HOLES INNER RACE. |
| . |
P |
POSITION 6 - 2.3/4 INCH BALL DIAM |
| . |
P |
POSITION 9 - ONE MOLDED BUNA-N RUBBER LAND SEAL WITH CONTACT LIP ON OUTER RACE AND ONE PHENOLIC LAMINATE SHIELD. |
| . |
P |
POSITION 10 - WELD RING OUTER RACE AND TAPPED HOLES INNER RACE. |
| . |
Q |
POSITION 6 - 3 INCH BALL DIAM |
| . |
Q |
POSITION 9 - ONE MOLDED BUNA-N RUBBER LAND SEAL WITH CONTACT LIP ON INNER RACE. |
| . |
Q |
POSITION 10 - WELD RING OUTER RACE AND COUNTERBORED HOLES INNER RACE. |
| . |
R |
POSITION 9 - ONE MOLDED BUNA-N RUBBER LAND SEAL WITH CONTACT LIP ON OUTER RACE. |
| . |
S |
POSITION 9 - TWO PHENOLIC LAMINATE SHIELDS. |
| . |
T |
POSITION 9 - ONE PHENOLIC LAMINATE SHIELD. |
| . |
U |
POSITION 9 - NO .SEALS. |
| . |
Z |
POSITION 9 - OTHER. |
| . |
Z |
POSITION 10 - OTHER. |
| A |
. |
RACE SECTION FROM CATALOGUE 320 |
| B |
. |
RACE SECTION FROM CATALOGUE 320 |
| C |
. |
RACE SECTION FROM CATALOGUE 320 |
| D |
. |
RACE SECTION FROM CATALOGUE 320 |
| E |
. |
RACE SECTION FROM CATALOGUE 320 |
| F |
. |
RACE SECTION FROM CATALOGUE 320 |
| G |
. |
RACE SECTION FROM CATALOGUE 320 |
| H |
. |
RACE SECTION OF CATALOGUE T-220 |
| J |
. |
RACE SECTION OF CATALOGUE T-220 |
| L |
. |
RACE SECTION OF CATALOGUE T-220 |
| P |
. |
RACE SECTION OF CATALOGUE T-220 |
| S |
. |
MODIFIED RACE SECTION OF CVATALOGIE T-220 |
| T |
. |
MODIFIED RACE SECTION OF CVATALOGIE T-220 |
| V |
. |
MODIFIED RACE SECTION OF CVATALOGIE T-220 |
| W |
. |
MODIFIED RACE SECTION OF CVATALOGIE T-220 |
Bearing >Bearing Numbers > Keene turntyable
